高压辊磨+搅拌磨在某复杂难选铁矿石选别工艺中的优越性研究

为了验证在某复杂难选铁矿石的选矿工艺中，应用高压辊磨机和立式搅拌磨的优越性，进行了一系列对比试验。结果表明，与颚式破碎机相比，高压辊磨机产品的粉矿率更高，产品的可磨性更好；与球磨机相比，立式搅拌磨机细磨效率更高、效果更好，相同磨矿细度下，立式搅拌磨机磨矿产品的解离度更高，磁选铁精矿品位也更高；高压辊磨+立式搅拌磨在处理复杂难选铁矿石方面具有显著的优势。     

某贫磁赤铁矿石选矿工艺试验研究

为了使某矿山贫磁赤铁矿资源得到合理的开发利用，针对现开采部位矿石的性质和可选性问题，进行了工艺矿物学和可选性试验研究。试验结果表明：采用弱磁、强磁—阴离子反浮选工艺可得到精矿铁品位68.55%、精矿产率36.41%、金属回收率79.92%、尾矿品位9.86%的较好选别指标，说明矿石的可选性较好，为该矿石的合理开发利用提供了可靠的技术依据。     

高等级生物安全实验室通风空调系统冗余设计原则探讨

对比分析了国内外标准有关高等级生物安全实验室通风空调系统冗余设计的要求。结合我国已有高等级生物安全实验室,重点分析了送风机、排风机、排风高效过滤器冗余设计的具体实施形式和存在的问题,给出了冗余设计原则建议。     

The Electron–Phonon Interaction of Low-Dimensional and Multi-Dimensional Materials from He Atom Scattering

Atom scattering is becoming recognized as a sensitive probe of the electron–phonon interaction parameter λ at metal and metal-overlayer surfaces. Here, the theory is developed, linking λ to the thermal attenuation of atom scattering spectra (in particular, the Debye–Waller factor), to conducting materials of different dimensions, from quasi-1D systems such as W(110):H(1 × 1) and Bi(114), to quasi-2D layered chalcogenides, and high-dimensional surfaces such as quasicrystalline 2ML-Ba(0001)/Cu(001) and d-AlNiCo(00001). Values of λ obtained using He atoms compare favorably with known values for the bulk materials. The corresponding analysis indicates in addition, the number of layers contributing to the electron–phonon interaction, which is measured in an atom surface collision.     

融合前沿研究的液体电介质击穿教学研究

针对《高电压与绝缘技术》课程中液体电介质的教学难点，提出了融合前沿研究的液体电介质击穿教学方法。基于前沿的液体放电应用背景与先进的液体放电研究平台，形象地展示液体电介质的动态击穿过程，在教学内容、教学方法、考核方式等方面进行科教融合改进，实施“以学生为中心”理念的课程教学设计。该教学方式取得了较好的教学效果，能够为其它知识点的教学质量提升提供参考。     

The isothermal reduction kinetics of chromium-bearing vanadium–titanium magnetite sinter

The reduction of chromium-bearing vanadium–titanium magnetite sinter (CVTMS) by CO was investigated at 1123–1223?K. The reduction degree increased with increasing temperature. The isothermal reduction kinetics of CVTMS was analysed, according to Sharp analysis and ln–ln analysis, the kinetic mechanism of reduction process for all samples in different basicity can be represented as f(α)?=?1.61(1?α)[?ln(1?α)]^1–1/1.61. The reaction activation energy of all samples (R?=?1.9, 2.1, 2.3, obtained according to the components of the materials burdening used in sintering process) at different reaction degrees were calculated by the model-free method. And the pre-exponential factors of reaction also were calculated by the mathematical method. The rate controlling step for the reduction process under the present reduction condition was chemical reaction.     

高供氧压力下高马赫数氧枪数值模拟

  以北方某钢厂100 t转炉为原型，建立顶吹转炉炉内流场的三维数学模型，采用Fluent软件研究了不同高马赫数氧气射流与熔池钢液速度流场分布之间的依赖关系。研究发现，高马赫数氧枪在Ma（马赫数）为2.0～2.3时，曲线平稳，为最佳供氧压力。在提高供氧压力的同时，氧气射流的最大速度、熔池钢液面的冲击直径及冲击深度也随之增加。模拟结果显示，氧气射流在设计工况氧压小于1.0 MPa时，射流之间相互干扰作用最弱；氧气射流在设计工况氧压力大于1.0 MPa后，冲击直径与冲击深度增幅较小。基于上述研究，在实际生产中应用了高马赫数氧枪后，并结合变枪变压操作工艺，可以改善熔池底部钢液流动状况、稳定转炉吹炼过程、控制炉渣喷溅。     

高效液相色谱-质谱联用法测定薏苡仁药材中黄曲霉毒素

目的建立高效液相色谱-质谱联用法(high performance liquid chromatography-masss pectrometer,HPLC-MS)测定薏苡仁中药饮片中黄曲霉毒素B_1、B_2、G_1、G_2的方法,并对比不同产地薏苡仁中黄曲霉毒素含量。方法样品经过免疫亲合柱处理后,采用HPLC-MS进行测定。分析柱为C18柱(50 mm×2.1 mm, 1.8μm),流动相为10 mmol/L醋酸铵溶液-甲醇溶液,梯度洗脱,流速为0.3 mL/min,柱温为25℃。结果黄曲霉毒素B_1在0.26～10.4ng/mL浓度范围内与峰面积值均呈现良好的线性关系(r~2=0.9995),平均加样回收率为75.4%～123.9%,黄曲霉毒素B2在0.0875～3.5 ng/mL浓度范围内与峰面积值均呈现良好的线性关系(r~2=0.9996),平均加样回收率为71.1%～124.2%,黄曲霉毒素G_1在0.295～11.89 ng/mL浓度范围内与峰面积值均呈现良好的线性关系(r~2=0.9995),平均加样回收率为78.9%～112.2%,黄曲霉毒素G2在0.1475～5.9 ng/mL浓度范围内与峰面积值均呈现良好的线性关系(r~2=0.9992),平均加样回收率为73.8%～123.9%。结论该方法准确、可靠、专属性强,通过精确化合物离子监测,可准确的测定薏苡仁中黄曲霉毒素含量。